HEA (Highways Electrical Association)
HEA promotes safety, competence, and compliance in highways electrical work through training, certification, and industry support.
ENQUIRY FORM
The 210 – Working in the Vicinity of DNO/IDNO Equipment (Including G39) course, accredited by the HEA, is designed to provide participants with the knowledge and skills required to work safely around Distribution Network Operator (DNO) and Independent Distribution Network Operator (IDNO) equipment. This course covers essential safety practices, regulatory requirements, and practical techniques for ensuring safe operations in the vicinity of electrical equipment.
Introduction to DNO/IDNO Equipment
Safety Regulations and Standards
Risk Assessment and Hazard Identification
Safe Working Practices
Emergency Procedures and Response
Practical Exercises and Simulations
The 210 – Working in the Vicinity of DNO/IDNO Equipment (Including G39) course is suitable for electrical engineers, technicians, contractors, and other professionals who work near or around DNO and IDNO equipment.
Upon successful completion of the course, participants will receive certification from the HEA, demonstrating their competency in working safely in the vicinity of DNO/IDNO equipment.
The course covers a wide range of topics, including:
There are no formal entry requirements for this course. However, participants should have a basic understanding of electrical safety practices and terminology.
Assessment is conducted through a combination of written examinations and practical assessments. Participants must demonstrate their understanding of key safety principles and the ability to apply them in practical scenarios to receive certification.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure.
The 210 – Working in the Vicinity of DNO/IDNO Equipment (Including G39) course is designed to provide participants with essential knowledge and practical skills required to work safely near Distribution Network Operator (DNO) and Independent Distribution Network Operator (IDNO) equipment. This comprehensive training ensures that participants are well-prepared to identify and manage risks associated with working near live electrical equipment, ensuring compliance with G39 regulations.
The course begins with an overview of the roles and responsibilities of Distribution Network Operators (DNOs) and Independent Distribution Network Operators (IDNOs). Participants will learn about the different types of equipment managed by these operators and the significance of understanding their function and operation. This section emphasises the importance of recognising the hazards associated with working near live electrical equipment and the regulatory framework that governs such activities.
A critical component of the course involves a detailed explanation of G39 regulations, which set out the safety standards for working near live electrical equipment. Participants will explore the specific requirements of G39, including the obligations of employers and employees. This segment covers the legal implications of non-compliance and highlights the importance of adhering to G39 to prevent accidents and ensure the safety of all personnel on site.
Effective risk assessment is fundamental to working safely near DNO/IDNO equipment. Participants will learn techniques for conducting comprehensive risk assessments specific to electrical hazards. This module includes identifying potential risks, evaluating the severity and likelihood of hazards, and implementing control measures to mitigate these risks. Practical exercises may include real-life scenarios where participants assess risks and propose appropriate safety measures.
This section focuses on the implementation of safe working practices when operating near DNO/IDNO equipment. Participants will be trained on the correct procedures for maintaining a safe working distance from live equipment, using appropriate tools and equipment, and following established safety protocols. The course covers the importance of using personal protective equipment (PPE) and the correct procedures for isolating and securing the work area to prevent accidental contact with live equipment.
Understanding and responding to electrical emergencies is crucial for ensuring safety in the vicinity of DNO/IDNO equipment. This module educates participants on the steps to take in the event of an electrical incident, including first aid for electrical injuries, emergency isolation procedures, and evacuation plans. Participants will also learn about the importance of reporting incidents and near-misses to help prevent future occurrences.
Participants will receive training on the correct use and maintenance of tools and equipment used when working near live electrical installations. This includes understanding the limitations and capabilities of different types of equipment, ensuring proper calibration, and conducting regular inspections to identify potential faults. The course also covers the importance of using insulated tools and the correct techniques for handling and storing equipment.
Effective site safety management involves coordinating activities with other workers and stakeholders to ensure a safe working environment. This section addresses the importance of communication and collaboration, including the roles of site supervisors and safety officers in overseeing activities near DNO/IDNO equipment. Participants will learn strategies for maintaining clear communication channels, managing work schedules, and coordinating emergency responses to enhance overall site safety.
Working near electrical installations can have environmental implications, particularly regarding the management of waste materials and the prevention of contamination. This module educates participants on the environmental risks associated with electrical work and the measures required to mitigate these risks. Participants will learn about the importance of proper waste disposal, spill prevention, and the safe handling of hazardous materials to minimise environmental impact.
The course concludes with a review of the key concepts covered, ensuring that participants have a thorough understanding of safe working practices near DNO/IDNO equipment. This final module includes a recap of G39 regulations, risk assessment techniques, and emergency procedures. Participants will have the opportunity to ask questions and discuss any concerns, ensuring they leave the course with the confidence to apply their knowledge in real-world situations.
By the end of the 210 – Working in the Vicinity of DNO/IDNO Equipment (Including G39) course, participants will have gained a solid foundation in electrical safety principles, enabling them to contribute to safer working practices and environments in the utility sector.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
The purpose of this course is to equip participants with the necessary skills and knowledge to work safely around DNO and IDNO equipment, ensuring compliance with relevant safety regulations and standards.
This course is suitable for electrical engineers, technicians, contractors, and other professionals who work near or around DNO and IDNO equipment.
There are no formal entry requirements. However, participants should have a basic understanding of electrical safety practices and terminology.
The certification is typically valid for a period of three years. After this period, participants will need to undergo a refresher course and reassessment to maintain their certification.
The course covers a range of safety measures, including risk assessment, safe working practices, maintaining safe distances from live equipment, and emergency procedures.
Participants will develop practical skills in conducting risk assessments, identifying hazards, implementing control measures, and responding to emergencies in the vicinity of DNO/IDNO equipment.
The course is assessed through a combination of written examinations and practical assessments. Participants must demonstrate their proficiency in applying key safety principles to receive certification.
Upon successful completion of the course, participants will receive a certification from the HEA, demonstrating their competency in working safely around DNO/IDNO equipment.
While prior experience with electrical equipment is not required, it is beneficial. The course is designed to provide comprehensive training for participants with varying levels of experience.
Completing this course ensures that participants are competent in working safely around DNO/IDNO equipment, reducing the risk of accidents and improving overall safety. Additionally, it provides formal recognition of the participant’s skills through HEA certification.
DNO/IDNO equipment should be inspected regularly as part of routine maintenance and safety checks. The course covers the importance of regular inspections to ensure equipment reliability and safety.
The course covers a range of emergency procedures, including developing emergency response plans, evacuation procedures, and providing first aid.
Yes, the course can be tailored to meet the specific needs of different industries, ensuring that the training is relevant to the participants’ work environment and operational requirements.
If a participant fails the assessment, they will receive feedback on the areas that need improvement and may be given the opportunity to retake the assessment or undergo additional training as needed.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
We don't cancel courses, we deliver 98% of courses - even the low runners! If we've agreed, we've agreed.
Our team are some of the most experienced people within the industry - offering the right advice.
We offer free Training Matrix Management, providing you with a fully managed training function, at no cost to you.
Our mission is to provide the best customer experiences within the training sector - without compromise.
* Excluding for events outside our control
Need some advice? Can't quite find what you're looking for? Want to check if we can deliver on your site? Or would just rather speak to someone to book your course. We're always at the end of the phone.
Booking Enquires