CPCS
The Construction Plant Competence Scheme (CPCS) certifies plant operators, ensuring safe, efficient machinery operation and enhanced site safety.
ENQUIRY FORM
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure or duration.
The CPCS A50 Loader/Securer – STGO course provides comprehensive training for individuals involved in the loading and securing of abnormal indivisible loads transported under Special Types General Order (STGO) regulations. This course covers essential theoretical knowledge and practical skills necessary to safely load, secure, and transport STGO loads, ensuring compliance with regulatory requirements and industry standards.
Introduction to STGO Regulations:
Safety Regulations and Procedures:
Loader/Securer Components and Controls:
Load Charts and Capacity Calculations:
Loading and Securing Techniques:
Site Setup and Environmental Considerations:
Emergency Procedures and Risk Management:
Maintenance and Inspection:
The A50 Loader/Securer – STGO course is suitable for individuals involved in the loading and securing of abnormal loads transported under STGO regulations, including loaders, securers, drivers, and transport managers.
Upon successful completion of the course, participants will receive the CPCS Red Trained Operator Card for the A50 Loader/Securer – STGO , certifying their competency in loading and securing STGO loads.
The course covers a wide range of topics related to loading and securing STGO loads, including safety regulations, equipment components, load charts, loading and securing techniques, site setup, emergency procedures, maintenance, and inspection.
There are no formal entry requirements for this course. However, participants should have a basic understanding of construction safety practices and terminology.
Assessment is conducted through a combination of written examinations and practical assessments. Participants must demonstrate proficiency in loading and securing STGO loads and understanding key safety principles to receive certification.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure or duration.
The CPCS A50 Loader/Securer – STGO course provides specialised training for individuals involved in the loading and securing of Special Types General Order (STGO ) loads. This course ensures participants are equipped with the necessary skills and knowledge to perform these tasks safely and efficiently, complying with the complex regulations governing STGO loads.
The course begins with an introduction to the roles and responsibilities of loaders and securers handling STGO loads. Participants will learn about the significance of proper loading and securing in ensuring the safety and efficiency of transport operations involving oversized and heavy loads. This module covers the fundamental principles of load handling and the importance of securing loads correctly to prevent accidents and damage during transit.
This module covers the extensive legal and regulatory requirements related to loading and securing operations for STGO loads. Key legislation, such as the Health and Safety at Work Act, the Road Traffic Act, and specific STGO regulations, will be discussed. Participants will understand the importance of compliance and the severe implications of failing to adhere to these regulations, including fines and legal actions.
Participants will gain an in-depth understanding of various STGO load characteristics and the equipment used in loading and securing operations. This includes the types of loads commonly handled, such as large machinery, construction equipment, and oversized materials, and the selection, inspection, and maintenance of securing equipment such as heavy-duty straps, chains, and tensioners. The course will cover the correct usage of these components to ensure safe and secure loading.
Emphasising the importance of pre-operation checks, this module teaches participants how to conduct thorough inspections of loading equipment and vehicles before use. Participants will learn how to identify defects, verify the functionality of securing devices, and perform essential maintenance tasks. Proper pre-operation checks are critical for preventing equipment failures and ensuring safe loading operations, especially for STGO loads.
This module covers the principles of load handling, including calculating load weights, understanding load distribution, and determining the centre of gravity. Participants will learn various securing techniques for different types of STGO loads, ensuring stability and safety during transport. Practical exercises will reinforce these skills, ensuring participants can apply them effectively on site.
Safety protocols and risk management are integral parts of the course. Participants will learn how to identify potential hazards associated with loading and securing STGO loads and implement control measures to mitigate risks. This includes understanding the risks of working near moving vehicles, managing the securing process safely, and ensuring the safety of personnel on site. Special attention is given to the complexities and risks specific to STGO loads, such as their impact on road infrastructure and the need for route planning.
Participants will learn about emergency procedures and response strategies. This module covers the development of emergency response plans, evacuation procedures, and the use of emergency equipment. Participants will be trained to respond effectively to emergencies such as load shifts, equipment failures, or accidents involving STGO loads.
Hands-on practical training is a core part of the course. Participants will perform loading and securing tasks under the supervision of experienced instructors, gaining practical experience and building their skills and confidence. Practical assessments will evaluate the participants’ ability to safely and effectively carry out loading and securing operations for STGO loads.
The course concludes with a comprehensive review of key concepts and a final assessment. Participants who successfully complete the course will receive CPCS certification, demonstrating their competence in loading and securing operations for STGO loads. This certification is a valuable credential that validates the operator’s ability to perform their job safely and efficiently.
By the end of the CPCS A50 Loader/Securer – STGO course, participants will have acquired the skills and knowledge necessary to handle a wide range of loading and securing operations for STGO loads, contributing to improved safety and operational effectiveness in transport and logistics environments.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
The CPCS A50 Loader/Securer – STGO course provides comprehensive training for individuals involved in the loading and securing of abnormal indivisible loads transported under Special Types General Order (STGO) regulations. The course covers essential theoretical knowledge and practical skills required to safely load, secure, and transport STGO loads in compliance with regulatory requirements and industry standards.
This course is suitable for individuals involved in the loading and securing of abnormal loads transported under STGO regulations, including loaders, securers, drivers, and transport managers.
Upon successful completion of the course, participants will receive the CPCS Red Trained Operator Card for the CPCS A50 Loader/Securer – STGO , certifying their competency in loading and securing STGO loads.
The course covers a wide range of topics, including:
There are no formal entry requirements for this course. However, participants should have a basic understanding of construction safety practices and terminology.
The course includes both theoretical and practical components. Participants will receive classroom-based instruction on key concepts and safety regulations, as well as hands-on training in loading and securing STGO loads.
The duration of the course can vary depending on the training provider. Typically, it ranges from a few days to a week, depending on the depth of training and participant experience.
Assessment is conducted through a combination of written examinations and practical assessments. Participants must demonstrate proficiency in loading and securing STGO loads and understanding key safety principles to receive certification.
Participants will be trained on equipment used in loading and securing STGO loads, learning about their components, controls, and safe operating practices.
Load charts and capacity calculations are crucial for determining the safe operating limits of the equipment. They help operators understand the maximum loads and configurations that can be safely handled under different conditions.
Key safety considerations include conducting pre-operational inspections, understanding load capacities, following proper loading and securing techniques, ensuring site setup and stability, and being prepared for emergency situations.
The course teaches participants how to identify, assess, and manage risks associated with loading and securing STGO loads. This includes understanding potential hazards, implementing control measures, and knowing how to respond in emergency situations.
Regular maintenance and inspection are essential to ensure the reliability and safety of the equipment. Participants will learn techniques for conducting routine checks and addressing any issues promptly.
Yes, training providers may offer customised versions of the course to address specific site requirements and conditions. It’s best to discuss your needs with the training provider beforehand.
Obtaining the CPCS Red Trained Operator Card demonstrates your competency and commitment to safety in loading and securing STGO loads. It can enhance your career prospects, as many employers require this certification for loader/securer roles.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
We don't cancel courses, we deliver 98% of courses - even the low runners! If we've agreed, we've agreed.
Our team are some of the most experienced people within the industry - offering the right advice.
We offer free Training Matrix Management, providing you with a fully managed training function, at no cost to you.
Our mission is to provide the best customer experiences within the training sector - without compromise.
* Excluding for events outside our control
Need some advice? Can't quite find what you're looking for? Want to check if we can deliver on your site? Or would just rather speak to someone to book your course. We're always at the end of the phone.
Booking Enquires