PUWER Regulations
PUWER Regulations mandate that work equipment is safe, suitable, and properly maintained to protect employees from workplace equipment hazards.
ENQUIRY FORM
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure or duration.
The CPCS A66d Compact Crane – 360° Pick and Carry course provides comprehensive training for individuals involved in the operation of compact cranes with 360° pick and carry capabilities. This course covers essential theoretical knowledge and practical skills required to safely and efficiently operate 360° pick and carry compact cranes in various industrial settings.
Introduction to Compact Cranes
Safety Regulations and Procedures
Crane Components and Controls
360° Pick and Carry Operations
Load Charts and Capacity Calculations
Operating Techniques and Practices
Site Setup and Environmental Considerations
Emergency Procedures and Risk Management
Maintenance and Inspection
The CPCS A66d Compact Crane – 360° Pick and Carry course is suitable for crane operators, industrial workers, site supervisors, and anyone involved in 360° pick and carry compact crane operations.
Upon successful completion of the course, participants will receive a CPCS certification demonstrating their competency in operating 360° pick and carry compact cranes.
The course covers a wide range of topics related to 360° pick and carry compact crane operation, including safety regulations, crane components, pick and carry operations, load charts, operating techniques, site setup, environmental considerations, maintenance, inspection, and emergency procedures.
There are no formal entry requirements for this course. However, participants should have a basic understanding of industrial safety practices and terminology. It is also beneficial for participants to have prior experience operating similar machinery.
Assessment is conducted through a combination of written examinations and practical assessments. Participants must demonstrate proficiency in operating 360° pick and carry compact cranes and understanding key safety principles to receive certification.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure or duration.
The CPCS A66d Compact Crane – 360° Pick and Carry course provides detailed training for operators of compact cranes with 360° pick-and-carry capabilities. This course ensures participants gain the necessary knowledge and practical skills to safely and efficiently operate these versatile cranes, adhering to industry standards and best practices.
The course begins with an overview of compact crane operations, focusing on the specific applications and benefits of using 360° pick-and-carry cranes. Participants will learn about the various types of compact cranes and their roles in different construction and industrial environments. This module covers the versatility and limitations of compact cranes in pick-and-carry operations.
Participants will be introduced to the legal and regulatory framework governing compact crane operations. This includes an overview of key legislation such as the Lifting Operations and Lifting Equipment Regulations (LOLER), the Health and Safety at Work Act, and other relevant standards. Emphasis is placed on understanding the legal responsibilities of operators to ensure compliance and safety.
This module covers an in-depth analysis of compact crane components, including the boom, jib, counterweights, controls, and safety devices. Participants will learn how each component functions and the importance of maintaining these parts to ensure the crane operates safely and efficiently.
The course provides detailed training on conducting pre-operation checks and routine maintenance. Participants will learn to inspect the crane for defects, verify the functionality of safety devices, and perform essential maintenance tasks. Proper inspection and maintenance practices are crucial for preventing equipment failures and ensuring safe operations.
Understanding and interpreting load charts is critical for safe crane operations. This module teaches participants how to read load charts, calculate safe working loads, and understand the factors that affect crane capacity. Participants will learn to assess different lifting configurations and ensure that loads do not exceed the crane’s capacity.
Participants will receive training in rigging and slinging techniques. This includes the selection of appropriate slings and lifting accessories, proper rigging practices, and ensuring secure load handling. Emphasis is placed on the importance of correct rigging to prevent accidents and ensure the stability of lifted loads.
This module covers the specific operating procedures for compact cranes with 360° pick-and-carry capabilities. Participants will learn techniques for lifting, moving, and placing loads while in motion, focusing on the safe operation of the crane’s 360° rotation mechanism. The course includes practical exercises to reinforce these skills, ensuring operators can manage different types of lifts safely and effectively.
Training on stability and load management is a key component of the course. Participants will learn how to maintain crane stability during lifting and carrying operations, considering factors such as load distribution, ground conditions, and crane configuration. This module covers techniques for managing loads to prevent tipping and ensure safe operations.
Effective communication and signalling are vital for safe crane operations. Participants will learn standard hand signals, radio protocols, and other communication methods used between crane operators and signalers. The course emphasises the importance of clear and concise communication to coordinate lifting and carrying operations safely.
Training on emergency procedures is an essential part of the course. Participants will learn how to respond to emergencies such as equipment failures, load instability, or accidents. This module covers the development of emergency response plans, evacuation procedures, and the use of emergency equipment.
Hands-on practical training forms a core part of the course. Participants will operate compact cranes under the supervision of experienced instructors, performing a variety of lifting and carrying tasks to build their skills and confidence. Practical assessments will evaluate the participants’ ability to safely and effectively operate compact cranes with 360° pick-and-carry capabilities.
The course concludes with a comprehensive review of key concepts and a final assessment. Participants who successfully complete the course will receive CPCS certification, demonstrating their competence in operating compact cranes for 360° pick-and-carry duties. This certification is a valuable credential that validates the operator’s ability to perform their job safely and efficiently.
By the end of the CPCS A66d Compact Crane – 360° Pick and Carry course, participants will have acquired the skills and knowledge necessary to handle a wide range of lifting and carrying tasks, contributing to improved safety and operational effectiveness on construction and industrial sites.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
The purpose of this course is to equip participants with the necessary skills and knowledge to safely and efficiently operate 360° pick and carry compact cranes, ensuring compliance with safety regulations and industry standards.
This course is suitable for crane operators, industrial workers, site supervisors, and anyone involved in 360° pick and carry compact crane operations.
There are no formal entry requirements. However, participants should have a basic understanding of industrial safety practices and terminology. Prior experience with similar machinery is beneficial but not mandatory.
If candidates are applying for their CPCS Trained Operator Card, they are required to complete the NOCN Operative Health, Safety and Environment Test prior to undertaking their test.
The CPCS certification for 360° pick and carry compact cranes is typically valid for five years. After this period, operators will need to undergo a refresher course and reassessment to maintain their certification.
The course covers a range of safety measures, including pre-operational inspections, safe load handling practices, 360° pick and carry crane operation techniques, emergency procedures, and risk management strategies to mitigate hazards associated with crane operations.
Participants will develop practical skills in operating 360° pick and carry compact cranes, including tasks such as load handling, rigging, and executing lifts efficiently. They will also learn techniques for safe manoeuvring and site setup.
The course is assessed through a combination of written examinations and practical assessments. Participants must demonstrate their proficiency in operating 360° pick and carry compact cranes and understanding key safety principles to receive certification.
Upon successful completion of the course, participants will receive a CPCS Red Trained Operator Card, demonstrating their competency in operating 360° pick and carry compact cranes.
If the candidate already holds the relevant VQ, then the CPCS Blue Competent Operator Card will be issued.
While prior experience with similar machinery is not required, it is beneficial. The course is designed to provide comprehensive training, so participants with varying levels of experience can succeed.
Completing this course ensures that operators are competent in using 360° pick and carry compact cranes safely and efficiently, which helps reduce workplace accidents and improve overall productivity. Additionally, it provides formal recognition of the operator’s skills through CPCS certification.
360° pick and carry compact cranes should be inspected before each use to ensure they are in safe operating condition. Regular maintenance checks and inspections are also covered in the course to ensure ongoing equipment reliability and safety.
The course addresses various environmental factors that can impact 360° pick and carry compact crane operations, such as ground conditions, weather, and site setup, and provides strategies to manage these factors effectively.
Yes, the course can be tailored to meet the specific needs of different industries, ensuring that the training is relevant to the participants’ work environment and operational requirements.
If a participant fails the assessment, they will receive feedback on the areas that need improvement and may be given the opportunity to retake the assessment or undergo additional training as needed.
This course specifically focuses on the operation of 360° pick and carry compact cranes, covering unique aspects such as 360° pick and carry operations, load handling, and handling specific challenges related to 360° pick and carry compact crane operations.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
We don't cancel courses, we deliver 98% of courses - even the low runners! If we've agreed, we've agreed.
Our team are some of the most experienced people within the industry - offering the right advice.
We offer free Training Matrix Management, providing you with a fully managed training function, at no cost to you.
Our mission is to provide the best customer experiences within the training sector - without compromise.
* Excluding for events outside our control
Need some advice? Can't quite find what you're looking for? Want to check if we can deliver on your site? Or would just rather speak to someone to book your course. We're always at the end of the phone.
Booking Enquires