CPCS
The Construction Plant Competence Scheme (CPCS) certifies plant operators, ensuring safe, efficient machinery operation and enhanced site safety.
ENQUIRY FORM
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure or duration.
The CPCS A68a Plant Driving – Tracked Boom Equipped (Up to 10 Tonnes – Non-operational Only) course provides comprehensive training for individuals responsible for driving tracked boom-equipped machinery. This course covers essential theoretical knowledge and practical skills required to safely and efficiently drive tracked boom-equipped machinery up to 10 tonnes, focusing on non-operational driving.
Introduction to Plant Driving
Safety Regulations and Procedures
Tracked Boom Components and Controls
Driving Techniques and Practices
Load Handling and Stability
Site Setup and Environmental Considerations
Emergency Procedures and Risk Management
Maintenance and Inspection
The CPCS A68a Plant Driving – Tracked Boom Equipped (Up to 10 Tonnes – Non-operational Only) course is suitable for plant drivers, construction workers, site supervisors, and anyone involved in driving tracked boom-equipped machinery for non-operational purposes.
Upon successful completion of the course, participants will receive a CPCS certification demonstrating their competency in driving tracked boom-equipped machinery up to 10 tonnes for non-operational purposes.
The course covers a wide range of topics related to plant driving, including safety regulations, machinery components, driving techniques, load handling, site setup, environmental considerations, maintenance, inspection, and emergency procedures.
There are no formal entry requirements for this course. However, participants should have a basic understanding of construction safety practices and terminology. It is also beneficial for participants to have prior experience operating similar machinery.
Assessment is conducted through a combination of written examinations and practical assessments. Participants must demonstrate proficiency in driving tracked boom-equipped machinery up to 10 tonnes and understanding key safety principles to receive certification.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure or duration.
The CPCS A68a Plant Driving – Tracked Boom Equipped (Up to 10 Tonnes – Non-operational Only) course is designed to equip participants with the necessary skills and knowledge for the non-operational movement of tracked boom-equipped plant machinery up to 10 tonnes. This comprehensive training covers safety protocols, machine handling, and maintenance practices, ensuring participants can maneuver these machines safely within designated areas.
The course begins with an overview of tracked boom-equipped machinery, including its features, capabilities, and applications in various industrial and construction environments. Participants will learn about the different types of tracked boom machines and their roles in material handling and lifting operations.
This module covers the legal and regulatory requirements for operating tracked boom-equipped machinery. Key legislation, such as the Health and Safety at Work Act, the Provision and Use of Work Equipment Regulations (PUWER), and the Lifting Operations and Lifting Equipment Regulations (LOLER), will be discussed. Understanding these regulations is crucial for ensuring compliance and maintaining a safe working environment.
Participants will gain an in-depth understanding of the main components and functions of tracked boom-equipped plant machinery. This includes the engine, hydraulic systems, boom, tracks, and controls. The course will explain the purpose and operation of each component, along with routine maintenance practices to keep the equipment in optimal condition.
Emphasising the importance of pre-operation checks and regular maintenance, this module teaches participants how to inspect the machinery for defects, verify the functionality of safety devices, and perform essential maintenance tasks. Proper pre-operation checks and maintenance are critical for preventing equipment failures and ensuring safe operation.
Participants will receive detailed training on various machine handling techniques for non-operational movements. This includes starting and stopping the machine, maneuvering within confined spaces, and navigating various terrains. Practical exercises will reinforce these skills, ensuring participants can operate the machine safely and effectively in different scenarios.
Safety protocols and risk management are crucial components of the course. Participants will learn how to identify potential hazards associated with tracked boom-equipped machinery operations and implement control measures to mitigate risks. This includes understanding the risks of working near pedestrian areas, managing the movement process safely, and ensuring the safety of personnel on site.
Effective communication and coordination are essential for safe plant driving operations. Participants will learn standard communication protocols and techniques for coordinating with other site personnel, including supervisors and co-workers. The course emphasises the importance of clear and concise communication to ensure safe and efficient operations.
Participants will learn about emergency procedures and response strategies. This module covers the development of emergency response plans, evacuation procedures, and the use of emergency equipment. Participants will be trained to respond effectively to emergencies such as equipment failures, load spills, or accidents.
Hands-on practical training is a core part of the course. Participants will operate tracked boom-equipped machinery under the supervision of experienced instructors, performing a variety of movement and maneuvering tasks to build their skills and confidence. Practical assessments will evaluate the participants’ ability to safely and effectively operate the machinery during non-operational tasks.
The course concludes with a comprehensive review of key concepts and a final assessment. Participants who successfully complete the course will receive CPCS certification, demonstrating their competence in operating tracked boom-equipped plant machinery up to 10 tonnes for non-operational movements. This certification is a valuable credential that validates the operator’s ability to perform their job safely and efficiently.
By the end of the CPCS A68a Plant Driving – Tracked Boom Equipped (Up to 10 Tonnes – Non-operational Only) course, participants will have acquired the skills and knowledge necessary to handle a wide range of non-operational tasks, contributing to improved safety and operational effectiveness in industrial and construction environments.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
The CPCS A68a Plant Driving – Tracked Boom Equipped (Up to 10 Tonnes – Non-operational Only) course aims to equip participants with the necessary skills and knowledge to safely and efficiently drive tracked boom-equipped machinery up to 10 tonnes for non-operational purposes, ensuring compliance with safety regulations and industry standards.
This course is suitable for plant drivers, construction workers, site supervisors, and anyone involved in driving tracked boom-equipped machinery for non-operational purposes.
There are no formal entry requirements. However, participants should have a basic understanding of construction safety practices and terminology. Prior experience with similar machinery is beneficial.
The CPCS certification for plant driving is typically valid for five years. After this period, operators will need to undergo a refresher course and reassessment to maintain their certification.
The course covers a range of safety measures, including pre-operational inspections, safe driving techniques, load handling practices, emergency procedures, and risk management strategies to mitigate hazards associated with plant driving operations.
Participants will develop practical skills in driving tracked boom-equipped machinery in various scenarios, including tasks such as safe driving, manoeuvring, and positioning of the machinery. They will also learn techniques for maintaining load stability and managing environmental factors.
The course is assessed through a combination of written examinations and practical assessments. Participants must demonstrate their proficiency in driving tracked boom-equipped machinery up to 10 tonnes and understanding key safety principles.
Upon successful completion of the course, participants will receive a CPCS certification, demonstrating their competency in driving tracked boom-equipped machinery up to 10 tonnes for non-operational purposes.
While prior experience with similar machinery is not required, it is beneficial. The course is designed to provide comprehensive training, so participants with varying levels of experience can succeed.
Completing this course ensures that drivers are competent in driving tracked boom-equipped machinery safely and efficiently, which helps reduce workplace accidents and improve overall site safety and operational efficiency. Additionally, it provides formal recognition of the driver’s skills through CPCS certification.
Tracked boom-equipped machinery should be inspected before each use to ensure they are in safe operating condition. Regular maintenance checks and inspections are also covered in the course to ensure ongoing equipment reliability and safety.
The course addresses various environmental factors that can impact plant driving operations, such as ground conditions, weather, and site setup, and provides strategies to manage these factors effectively.
Yes, the course can be tailored to meet the specific needs of different industries, ensuring that the training is relevant to the participants’ work environment and operational requirements.
If a participant fails the assessment, they will receive feedback on the areas that need improvement and may be given the opportunity to retake the assessment or undergo additional training as needed.
This course specifically focuses on the driving of tracked boom-equipped machinery for non-operational purposes, covering unique aspects such as safe driving techniques, load handling, and handling specific challenges related to plant driving operations.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
We don't cancel courses, we deliver 98% of courses - even the low runners! If we've agreed, we've agreed.
Our team are some of the most experienced people within the industry - offering the right advice.
We offer free Training Matrix Management, providing you with a fully managed training function, at no cost to you.
Our mission is to provide the best customer experiences within the training sector - without compromise.
* Excluding for events outside our control
Need some advice? Can't quite find what you're looking for? Want to check if we can deliver on your site? Or would just rather speak to someone to book your course. We're always at the end of the phone.
Booking Enquires