PUWER Regulations
PUWER Regulations mandate that work equipment is safe, suitable, and properly maintained to protect employees from workplace equipment hazards.
ENQUIRY FORM
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure or duration.
The CPCS A04c Tower Crane – Trolley Jib (Remote Controlled) course provides comprehensive training for individuals involved in the operation of remote-controlled tower cranes with a trolley jib configuration. This course aims to equip participants with the necessary theoretical knowledge and practical skills to safely and efficiently operate trolley jib tower cranes in various construction and industrial settings.
Introduction to Tower Cranes
Safety Regulations and Procedures
Tower Crane Components and Controls
Load Charts and Capacity Calculations
Operating Techniques and Practices
Site Setup and Environmental Considerations
Emergency Procedures and Risk Management
Maintenance and Inspection
The CPCS A04c Tower Crane – Trolley Jib (Remote Controlled) course is suitable for crane operators, construction workers, riggers, supervisors, and anyone involved in trolley jib tower crane operations.
Upon successful completion of the course, participants will receive certification demonstrating their competency in operating trolley jib tower cranes.
The course covers a wide range of topics related to trolley jib tower crane operation, including safety regulations, crane components, load charts, operating techniques, site setup, emergency procedures, maintenance, and inspection.
There are no formal entry requirements for this course. However, participants should have a basic understanding of construction safety practices and terminology.
Assessment is conducted through a combination of written examinations and practical assessments. Participants must demonstrate proficiency in operating trolley jib tower cranes and understanding key safety principles to receive certification.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure or duration.
The CPCS A04c Tower Crane – Trolley Jib (Remote Controlled) course is designed to provide comprehensive training for operators of trolley jib tower cranes that are controlled remotely. This advanced training ensures that participants gain the necessary knowledge and practical skills to safely and efficiently operate remote-controlled trolley jib tower cranes, adhering to industry standards and best practices.
The course begins with an introduction to the roles and responsibilities of tower crane operators. Participants will learn about the different types of tower cranes, with a specific focus on trolley jib tower cranes and the nuances of remote-controlled operations. This module covers the advantages of using remote-controlled cranes and their applications in various construction scenarios.
Participants will be introduced to the legal and regulatory framework governing tower crane operations. This includes an overview of key legislation such as the Lifting Operations and Lifting Equipment Regulations (LOLER), the Health and Safety at Work Act, and other relevant standards. Emphasis is placed on understanding the legal responsibilities of operators to ensure compliance and safety.
This module covers an in-depth analysis of trolley jib tower crane components, including the trolley mechanism, jib, cab (if applicable), counterweights, slewing unit, and safety devices. Participants will learn how each component functions and the importance of maintaining these parts to ensure the crane operates safely and efficiently.
The course provides detailed training on conducting pre-operation checks and routine maintenance. Participants will learn to inspect the crane for defects, verify the functionality of safety devices, and perform essential maintenance tasks. Proper inspection and maintenance practices are crucial for preventing equipment failures and ensuring safe operations.
Understanding and interpreting load charts is critical for safe crane operations. This module teaches participants how to read load charts, calculate safe working loads, and understand the factors that affect crane capacity. Participants will learn to assess different lifting configurations and ensure that loads do not exceed the crane’s capacity.
Participants will receive training in rigging and slinging techniques. This includes the selection of appropriate slings and lifting accessories, proper rigging practices, and ensuring secure load handling. Emphasis is placed on the importance of correct rigging to prevent accidents and ensure the stability of lifted loads.
This module covers the operating procedures for remote-controlled trolley jib tower cranes. Participants will learn techniques for lifting, moving, and placing loads, including the safe operation of the trolley mechanism and jib slewing. The course includes practical exercises to reinforce these skills, ensuring operators can manage different types of lifts safely and effectively.
Effective communication and signalling are vital for safe crane operations. Participants will learn standard hand signals, radio protocols, and other communication methods used between crane operators and signalers. The course emphasises the importance of clear and concise communication to coordinate lifting operations safely.
This module focuses on the specific skills required for operating trolley jib tower cranes remotely. Participants will learn how to use remote control units, including the correct handling and maintenance of remote controls. Training includes troubleshooting common issues and ensuring the reliability of remote-controlled operations.
Training on emergency procedures is an essential part of the course. Participants will learn how to respond to emergencies such as equipment failures, load instability, or accidents. This module covers the development of emergency response plans, evacuation procedures, and the use of emergency equipment.
Hands-on practical training forms a core part of the course. Participants will operate remote-controlled trolley jib tower cranes under the supervision of experienced instructors, performing a variety of lifting tasks to build their skills and confidence. Practical assessments will evaluate the participants’ ability to safely and effectively operate remote-controlled trolley jib tower cranes.
The course concludes with a comprehensive review of key concepts and a final assessment. Participants who successfully complete the course will receive CPCS certification, demonstrating their competence in operating remote-controlled trolley jib tower cranes. This certification is a valuable credential that validates the operator’s ability to perform their job safely and efficiently.
By the end of the CPCS A04c Tower Crane – Trolley Jib (Remote Controlled) course, participants will have acquired the skills and knowledge necessary to handle a wide range of lifting tasks, contributing to improved safety and operational effectiveness on construction and industrial sites.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
The purpose of this course is to provide comprehensive training for individuals involved in the operation of remote-controlled tower cranes with a trolley jib configuration. It covers both theoretical knowledge and practical skills essential for safe and efficient crane operations.
This course is suitable for crane operators, construction workers, riggers, supervisors, and anyone involved in operating trolley jib tower cranes remotely. It is particularly beneficial for those who will be directly responsible for the operation and safety of these cranes on construction sites.
Upon successful completion, participants will receive a CPCS (Construction Plant Competence Scheme) certification for operating trolley jib tower cranes. This certification demonstrates their competency and compliance with industry standards for crane operation.
There are no formal entry requirements. However, it is recommended that participants have a basic understanding of construction safety practices and terminology. Prior experience with crane operations or similar heavy machinery is beneficial but not mandatory.
The course covers a wide range of topics, including:
The course includes both theoretical instruction and practical training. It starts with classroom-based learning to cover essential theory, followed by hands-on practice sessions where participants operate trolley jib tower cranes under supervision. This combination ensures a thorough understanding and practical proficiency.
Practical training involves operating trolley jib tower cranes in various simulated lifting and hoisting tasks. Participants will practice positioning the crane, rigging loads, executing lifts, and performing safe operational manoeuvres. Realistic scenarios are used to prepare operators for actual job site conditions.
Participants are assessed through a combination of written examinations and practical assessments. Written exams test their understanding of theoretical concepts, while practical assessments evaluate their ability to operate the crane safely and efficiently. Successful candidates must demonstrate proficiency in both areas to receive certification.
The course emphasises a variety of safety measures, including:
Participants learn techniques for conducting routine maintenance checks and inspections on trolley jib tower cranes. This includes checking for wear and tear, ensuring proper lubrication of moving parts, and identifying potential issues before they lead to equipment failure. Emphasis is placed on maintaining crane reliability and safety.
All necessary equipment and materials for practical training are provided as part of the course. Participants are typically required to bring appropriate personal protective equipment (PPE), such as hard hats, safety boots, and high-visibility clothing.
The course duration varies depending on the training provider, but it typically spans several days. This period includes both classroom-based theoretical instruction and practical training sessions to ensure comprehensive coverage of all topics.
Yes, the course includes training on environmental factors and their impact on tower crane operations. Participants will learn strategies for selecting suitable lifting locations, establishing proper ground conditions, and minimising environmental impact during crane operations.
If a participant fails the assessment, they will receive detailed feedback on their performance. Depending on the training provider’s policies, they may have the opportunity to retake the assessment or participate in additional training sessions to address any gaps in knowledge or skills.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
We don't cancel courses, we deliver 98% of courses - even the low runners! If we've agreed, we've agreed.
Our team are some of the most experienced people within the industry - offering the right advice.
We offer free Training Matrix Management, providing you with a fully managed training function, at no cost to you.
Our mission is to provide the best customer experiences within the training sector - without compromise.
* Excluding for events outside our control
Need some advice? Can't quite find what you're looking for? Want to check if we can deliver on your site? Or would just rather speak to someone to book your course. We're always at the end of the phone.
Booking Enquires