CPCS
The Construction Plant Competence Scheme (CPCS) certifies plant operators, ensuring safe, efficient machinery operation and enhanced site safety.
ENQUIRY FORM
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure or duration.
The CPCS A36c Lorry Loader (Hydraulic Clamp) course provides comprehensive training for individuals involved in the operation of lorry loaders equipped with hydraulic clamps. This course covers essential theoretical knowledge and practical skills required to safely and efficiently operate lorry loaders with hydraulic clamps in various construction and industrial settings.
Introduction to Lorry Loaders and Hydraulic Clamps
Safety Regulations and Procedures
Lorry Loader Components and Controls
Load Charts and Capacity Calculations
Operating Techniques and Practices
Site Setup and Environmental Considerations
Emergency Procedures and Risk Management
Maintenance and Inspection
The CPCS A36c Lorry Loader (Hydraulic Clamp) course is suitable for crane operators, construction workers, riggers, supervisors, and anyone involved in lorry loader operations with hydraulic clamps.
Upon successful completion of the course and passing the CPCS technical test, participants will receive the CPCS Red Trained Operator Card for the Lorry Loader (Hydraulic Clamp).
The course covers a wide range of topics related to lorry loader operation, including safety regulations, loader components, load charts, operating techniques, site setup, emergency procedures, maintenance, and inspection.
There are no formal entry requirements for this course. However, participants should have a basic understanding of construction safety practices and terminology.
Assessment is conducted through a combination of written examinations, practical assessments, and a CPCS technical test. Participants must demonstrate proficiency in operating lorry loaders with hydraulic clamps and understanding key safety principles to receive a CPCS Red Trained Operator Card.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure or duration.
The CPCS A36c Lorry Loader (Hydraulic Clamp) course is designed to equip participants with the skills and knowledge required to operate lorry loaders with hydraulic clamp attachments safely and efficiently. This comprehensive training covers essential aspects of equipment operation, maintenance, safety protocols, and regulatory compliance, ensuring participants are well-prepared for various tasks in construction and industrial environments.
The course begins with an overview of lorry loaders, including their features, capabilities, and applications in different industrial and construction environments. Participants will learn about the versatility of these machines and their role in lifting and transporting materials using hydraulic clamps.
This module covers the legal and regulatory requirements for operating lorry loaders with hydraulic clamp attachments. Key legislation, such as the Health and Safety at Work Act, the Provision and Use of Work Equipment Regulations (PUWER), and the Lifting Operations and Lifting Equipment Regulations (LOLER), will be discussed. Understanding these regulations is crucial for ensuring compliance and maintaining a safe working environment.
Participants will gain an in-depth understanding of the main components and functions of lorry loaders. This includes the engine, hydraulic systems, chassis, stabilisers, boom, and hydraulic clamp attachments. The course will explain the purpose and operation of each component, along with routine maintenance practices to keep the equipment in optimal condition.
Emphasising the importance of pre-operation checks and regular maintenance, this module teaches participants how to inspect the lorry loader for defects, verify the functionality of safety devices, and perform essential maintenance tasks. Proper pre-operation checks and maintenance are critical for preventing equipment failures and ensuring safe operation.
This module covers the procedures for setting up a lorry loader for various tasks. Participants will learn how to select an appropriate location, ensure the lorry is on stable ground, and establish necessary safety barriers. The importance of site safety and correct setup procedures to prevent accidents is emphasised.
Participants will receive detailed training on various operational techniques and practices. This includes starting and stopping the machine, adjusting settings for different types of tasks, and managing the lifting and transporting process. Practical exercises will reinforce these skills, ensuring participants can operate the lorry loader safely and effectively in various scenarios.
This module covers safe lifting and handling techniques to optimise the performance of the lorry loader during operations. Participants will learn how to manage different types of loads, calculate load weights, and use the machine efficiently. Techniques for maintaining load stability and minimising material spillage will also be discussed.
Safety protocols and risk management are crucial components of the course. Participants will learn how to identify potential hazards associated with lorry loader operations and implement control measures to mitigate risks. This includes understanding the risks of working near pedestrian areas, managing the lifting process safely, and ensuring the safety of personnel on site.
The course includes training on using hydraulic clamp attachments with the lorry loader. Participants will learn how to attach and detach different tools and equipment, such as hydraulic clamps, to perform specific tasks. The importance of adhering to load capacity limits and using appropriate techniques is emphasised to prevent accidents and equipment damage.
Participants will learn about emergency procedures and response strategies. This module covers the development of emergency response plans, evacuation procedures, and the use of emergency equipment. Participants will be trained to respond effectively to emergencies such as equipment failures, load spills, or accidents.
Effective communication and coordination are essential for safe lorry loader operations. Participants will learn standard communication protocols and techniques for coordinating with other site personnel, including supervisors and co-workers. The course emphasises the importance of clear and concise communication to ensure safe and efficient operations.
Hands-on practical training is a core part of the course. Participants will operate lorry loaders with hydraulic clamp attachments under the supervision of experienced instructors, performing a variety of lifting and transporting tasks to build their skills and confidence. Practical assessments will evaluate the participants’ ability to safely and effectively operate the equipment during various tasks.
The course concludes with a comprehensive review of key concepts and a final assessment. Participants who successfully complete the course will receive CPCS certification, demonstrating their competence in operating lorry loaders with hydraulic clamp attachments. This certification is a valuable credential that validates the operator’s ability to perform their job safely and efficiently.
By the end of the CPCS A36c Lorry Loader (Hydraulic Clamp) course, participants will have acquired the skills and knowledge necessary to handle a wide range of lorry loader operations, contributing to improved safety and operational effectiveness in industrial and construction environments.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
The duration of the course typically ranges from 1 to 3 days, depending on the participants’ prior experience and the specific training provider’s schedule.
The main components include the hydraulic clamp itself, the boom, the slewing mechanism, the control panel, and the hydraulic system that powers the clamp and other movements.
No prior experience is required, but it is beneficial. The course is designed to accommodate both beginners and those with some experience in operating lorry loaders.
Certification renewal requirements vary by region and employer. Generally, it is recommended to renew your certification every 3 to 5 years to stay updated with the latest safety regulations and operating techniques.
Participants are typically required to wear safety boots, a high-visibility vest, a hard hat, and gloves. Some training providers may also require additional PPE, such as safety goggles or ear protection.
Yes, the course includes practical, hands-on training with lorry loaders equipped with hydraulic clamps to ensure participants gain real-world operating experience.
If you fail the practical assessment, you will receive feedback on the areas that need improvement and may be given the opportunity to retake the assessment after additional practice or training.
Yes, many training providers offer on-site training options, allowing the course to be conducted at your worksite using your equipment, which can be beneficial for familiarising participants with their specific operating environment.
Regular maintenance includes checking hydraulic fluid levels, inspecting the clamp and boom for wear and damage, ensuring all control mechanisms are functioning correctly, and performing any necessary lubrication and adjustments as recommended by the manufacturer.
Participants should be physically capable of operating the lorry loader and performing tasks such as climbing into the cab, handling controls, and conducting equipment inspections. If you have any concerns about physical requirements, discuss them with the training provider before enrolling.
Certified operators are responsible for following all safety protocols, conducting pre-operational inspections, ensuring safe handling and loading practices, and complying with local regulations and industry standards.
The hydraulic clamp is specifically designed for gripping and holding materials securely, making it ideal for handling irregularly shaped loads or materials that require precise placement. It differs from other attachments like hooks or buckets in its ability to provide a firm and controlled grip.
This course specifically focuses on lorry loaders with hydraulic clamps. While the skills learned are transferable, additional training or certification may be required to operate different types of lorry loaders or attachments.
Common hazards include load instability, overloading, equipment malfunction, and working in adverse weather conditions. The course will cover strategies to mitigate these risks and ensure safe operation.
Many training providers offer post-course support, including refresher courses, access to instructional materials, and ongoing advice to help you stay compliant and safe in your operations. Check with your specific provider for details on available support services.
The CPCS technical test involves both theoretical and practical components to assess your proficiency in operating a Lorry Loader with a Hydraulic Clamp.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
We don't cancel courses, we deliver 98% of courses - even the low runners! If we've agreed, we've agreed.
Our team are some of the most experienced people within the industry - offering the right advice.
We offer free Training Matrix Management, providing you with a fully managed training function, at no cost to you.
Our mission is to provide the best customer experiences within the training sector - without compromise.
* Excluding for events outside our control
Need some advice? Can't quite find what you're looking for? Want to check if we can deliver on your site? Or would just rather speak to someone to book your course. We're always at the end of the phone.
Booking Enquires