CPCS
The Construction Plant Competence Scheme (CPCS) certifies plant operators, ensuring safe, efficient machinery operation and enhanced site safety.
ENQUIRY FORM
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure or duration.
The CPCS A40e Slinger/Signaller (Lift Truck Only) course provides comprehensive training for individuals involved in the operation of lift trucks with slinging and signalling duties. This course focuses on essential theoretical knowledge and practical skills required to safely and efficiently manage lifting operations using lift trucks on construction sites.
Introduction to Slinger/Signaller Role:
Safety Regulations and Procedures:
Lift Truck Components and Controls:
Load Charts and Capacity Calculations:
Slinging and Signalling Techniques:
Site Setup and Environmental Considerations:
Emergency Procedures and Risk Management:
Maintenance and Inspection:
The CPCS A40e Slinger/Signaller (Lift Truck Only) course is suitable for individuals involved in slinging and signalling for lift truck operations, including construction workers, riggers, supervisors, and anyone responsible for managing lifting operations with lift trucks.
Upon successful completion of the course and passing the CPCS technical test, participants will receive the CPCS Red Trained Operator Card for the Slinger/Signaller (Lift Truck Only).
There are no formal entry requirements for this course. However, participants should have a basic understanding of construction safety practices and terminology.
Assessment is conducted through a combination of written examinations, practical assessments, and a CPCS technical test. Participants must demonstrate proficiency in slinging and signalling for lift truck operations and understanding key safety principles to receive certification.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure or duration.
The CPCS A40e Slinger/Signaller (Lift Truck Only) course provides comprehensive training for individuals involved in slinging and signalling operations specifically for lift trucks. This course ensures participants are equipped with the necessary skills and knowledge to perform slinging and signalling tasks safely and effectively when working with lift trucks.
The course begins with an introduction to the roles and responsibilities of a slinger/signaller, focusing on lift truck operations. Participants will learn about the significance of this role in ensuring the safety and efficiency of lifting operations involving lift trucks. The module covers the fundamental principles of slinging and signalling and the importance of clear communication during lifting operations.
This module covers the legal and regulatory requirements related to slinging and signalling operations for lift trucks. Key legislation, such as the Health and Safety at Work Act, Lifting Operations and Lifting Equipment Regulations (LOLER), and the Provision and Use of Work Equipment Regulations (PUWER), will be discussed. Participants will understand the importance of compliance and the implications of failing to adhere to these regulations.
Participants will gain an in-depth understanding of the various types of lift trucks and accessories used in slinging operations. This includes the components and functionalities of lift trucks, as well as the selection, inspection, and maintenance of slings, shackles, and other lifting accessories. The course will cover the correct usage of these components to ensure safe operation.
Emphasising the importance of pre-operation checks, this module teaches participants how to conduct thorough inspections of lift trucks and lifting accessories before use. Participants will learn how to identify defects, verify the functionality of safety devices, and perform essential maintenance tasks. Proper pre-operation checks are critical for preventing equipment failures and ensuring safe lifting operations.
This module covers the principles of load assessment, including calculating load weights, understanding load characteristics, and determining the centre of gravity. Participants will learn various slinging techniques for different types of loads, ensuring stability and safety during lifting. Practical exercises will reinforce these skills, ensuring participants can apply them effectively on site.
Effective signalling and communication are crucial for safe lifting operations. Participants will learn standard hand signals and communication protocols used in the industry. The course emphasises the importance of clear and concise communication between the slinger/signaller and the lift truck operator to ensure safe and efficient lifting operations.
Safety protocols and risk management are integral parts of the course. Participants will learn how to identify potential hazards associated with slinging and signalling operations for lift trucks and implement control measures to mitigate risks. This includes understanding the risks of working near pedestrian areas, managing the lifting process safely, and ensuring the safety of personnel on site.
Participants will learn about emergency procedures and response strategies. This module covers the development of emergency response plans, evacuation procedures, and the use of emergency equipment. Participants will be trained to respond effectively to emergencies such as equipment failures, load spills, or accidents.
Hands-on practical training is a core part of the course. Participants will perform slinging and signalling tasks under the supervision of experienced instructors, gaining practical experience and building their skills and confidence. Practical assessments will evaluate the participants’ ability to safely and effectively carry out slinging and signalling operations for lift trucks.
The course concludes with a comprehensive review of key concepts and a final assessment. Participants who successfully complete the course will receive CPCS certification, demonstrating their competence in slinging and signalling operations for lift trucks. This certification is a valuable credential that validates the operator’s ability to perform their job safely and efficiently.
By the end of the CPCS A40e Slinger/Signaller (Lift Truck Only) course, participants will have acquired the skills and knowledge necessary to handle a wide range of slinging and signalling operations for lift trucks, contributing to improved safety and operational effectiveness on construction sites.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
The primary focus of the CPCS A40e Slinger/Signaller (Lift Truck Only) course is to provide comprehensive training on slinging and signalling techniques specifically for lift truck operations. It covers essential theoretical knowledge and practical skills required to manage lifting operations safely and efficiently using lift trucks on construction sites.
This course is suitable for individuals involved in slinging and signalling for lift truck operations, including construction workers, riggers, supervisors, and anyone responsible for managing lifting operations with lift trucks.
There are no formal entry requirements for this course. However, participants should have a basic understanding of construction safety practices and terminology.
Participants will learn about the role and responsibilities of a slinger/signaller, safety regulations and procedures, lifting equipment components, load charts and capacity calculations, slinging and signalling techniques, site setup and environmental considerations, emergency procedures, risk management, and maintenance and inspection of lifting equipment.
The course includes both theoretical and practical training. Topics covered include safety regulations, equipment components, operating techniques, load charts, site setup, emergency procedures, and maintenance. Practical exercises will focus on slinging and signalling techniques specific to lift truck operations.
The duration of the course typically ranges from 2 to 5 days, depending on the training provider and the participants’ prior experience and knowledge.
Assessment is conducted through a combination of written examinations, practical assessments, and a CPCS technical test. Participants must demonstrate proficiency in slinging and signalling for lift truck operations and understanding key safety principles to receive certification.
Upon successful completion of the course and passing the CPCS technical test, participants will receive the CPCS Red Trained Operator Card for the Slinger/Signaller (Lift Truck Only).
Yes, the course includes practical training exercises where participants will practice slinging and signalling techniques specific to lift truck operations under the guidance of experienced instructors.
The course emphasises various safety measures, including pre-operational checks, proper use of lifting equipment, effective communication, risk management, emergency procedures, and adherence to safety regulations and standards.
Yes, participants will be trained on how to interpret load charts and capacity ratings for different configurations and lifting scenarios with lift trucks. Techniques for calculating load weights, angles, and equipment capacities will also be covered.
The training will involve various types of lifting equipment and components used with lift trucks. Participants will gain hands-on experience with the equipment necessary for slinging and signalling operations.
Some training providers may offer customised training solutions to meet specific site requirements. It is recommended to contact the training provider directly to discuss any customisation needs.
To maintain the CPCS Red Trained Operator Card, participants will need to complete the CPCS Renewal Test and demonstrate ongoing competence in slinging and signalling operations. This may involve additional training and assessments as required by CPCS guidelines.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
We don't cancel courses, we deliver 98% of courses - even the low runners! If we've agreed, we've agreed.
Our team are some of the most experienced people within the industry - offering the right advice.
We offer free Training Matrix Management, providing you with a fully managed training function, at no cost to you.
Our mission is to provide the best customer experiences within the training sector - without compromise.
* Excluding for events outside our control
Need some advice? Can't quite find what you're looking for? Want to check if we can deliver on your site? Or would just rather speak to someone to book your course. We're always at the end of the phone.
Booking Enquires