PUWER Regulations
PUWER Regulations mandate that work equipment is safe, suitable, and properly maintained to protect employees from workplace equipment hazards.
ENQUIRY FORM
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure or duration.
The CPCS A59c Excavator 360° – Above 10 Tonnes (Lifting Operations) course provides specialised training for individuals involved in operating 360° excavators above 10 tonnes for lifting operations. This course covers essential theoretical knowledge and practical skills required for safe and efficient lifting operations using large excavators in various construction and industrial settings.
Introduction to Excavators:
Safety Regulations and Procedures:
Excavator Components and Controls:
Load Charts and Capacity Calculations:
Operating Techniques and Practices:
Site Setup and Environmental Considerations:
Emergency Procedures and Risk Management:
Maintenance and Inspection:
The CPCS A59c Excavator 360° – Above 10 Tonnes (Lifting Operations) course is suitable for excavator operators, construction workers, site supervisors, and anyone involved in operating 360° excavators above 10 tonnes for lifting operations.
Upon successful completion of the course, participants will receive a CPCS certification demonstrating their competency in operating 360° excavators above 10 tonnes for lifting operations.
The course covers a wide range of topics related to 360° excavator lifting operations, including safety regulations, excavator components, load charts, operating techniques, site setup, emergency procedures, maintenance, and inspection.
There are no formal entry requirements for this course. However, participants should have a basic understanding of construction safety practices and terminology.
Assessment is conducted through a combination of written examinations and practical assessments. Participants must demonstrate proficiency in operating 360° excavators for lifting operations and understanding key safety principles to receive certification.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Note: The course structure may vary based on participants’ experience levels and any specific customisation requirements. The outline provided below is a general guide and may not reflect the exact course structure or duration.
The CPCS A59c Excavator 360° – Above 10 Tonnes (Lifting Operations) course is designed to provide operators with the skills and knowledge necessary to safely and efficiently carry out lifting operations using a 360° excavator. This training ensures participants are well-prepared to handle lifting tasks while adhering to safety protocols and industry standards.
The course begins with an introduction to the specific features and capabilities of 360° excavators used for lifting operations. Participants will learn about the common uses of these machines in various industries, as well as the advantages they offer for lifting tasks in construction and other sectors.
This module covers the legal and regulatory requirements relevant to performing lifting operations with 360° excavators above 10 tonnes. Participants will be introduced to key legislation, including the Health and Safety at Work Act, the Lifting Operations and Lifting Equipment Regulations (LOLER), and the Provision and Use of Work Equipment Regulations (PUWER). Understanding these regulations is crucial for ensuring compliance and maintaining a safe working environment.
Participants will gain a thorough understanding of the main components and functions of a 360° excavator above 10 tonnes, with a focus on lifting operations. This includes the engine, hydraulic systems, undercarriage, and attachments such as lifting hooks and chains. The course will explain the purpose and operation of each component, along with routine maintenance practices to keep the equipment in optimal condition.
The importance of conducting comprehensive pre-operation checks and regular maintenance is emphasised. Participants will learn how to inspect the excavator for any defects, verify the functionality of safety devices, and perform essential maintenance tasks. Proper pre-operation checks and maintenance are critical for preventing equipment failures and ensuring safe operation.
This module covers the procedures for setting up a 360° excavator for lifting operations. Participants will learn how to select an appropriate location, ensure the excavator is on stable ground, and establish any necessary safety barriers. The importance of site safety and correct setup procedures to prevent accidents is emphasised.
Participants will receive detailed training on a variety of lifting techniques and best practices. This includes starting and stopping the machine, adjusting settings for different types of lifts, and managing the lifting process. Practical exercises will reinforce these skills, ensuring participants can operate the excavator safely and effectively in various lifting scenarios.
This module covers load handling and material management techniques to optimise the performance of the excavator during lifting operations. Participants will learn how to manage different types of loads, calculate load weights, and use the excavator efficiently. Techniques for maintaining load stability and minimising material spillage will also be discussed.
Safety protocols and risk management are crucial components of the course. Participants will learn how to identify potential hazards associated with lifting operations and implement control measures to mitigate risks. This includes understanding the risks of working near overhead obstacles, managing the lifting process safely, and ensuring the safety of personnel on site.
The course includes training on using various attachments with the 360° excavator for lifting operations. Participants will learn how to attach and detach different tools and equipment, such as lifting hooks, chains, and slings, to perform specific tasks. The importance of adhering to load capacity limits and using appropriate techniques is emphasised to prevent accidents and equipment damage.
The course includes training on emergency procedures and response strategies. Participants will learn how to respond to emergencies such as equipment failures, load spills, or accidents. This module covers the development of emergency response plans, evacuation procedures, and the use of emergency equipment.
Effective communication and coordination are essential for safe lifting operations. Participants will learn standard communication protocols and techniques for coordinating with other site personnel, including supervisors and co-workers. The course emphasises the importance of clear and concise communication to ensure safe and efficient operations.
Hands-on practical training is a core part of the course. Participants will operate 360° excavators under the supervision of experienced instructors, performing a variety of lifting tasks to build their skills and confidence. Practical assessments will evaluate the participants’ ability to safely and effectively operate the excavator during lifting operations.
The course concludes with a comprehensive review of key concepts and a final assessment. Participants who successfully complete the course will receive CPCS certification, demonstrating their competence in operating 360° excavators above 10 tonnes for lifting operations. This certification is a valuable credential that validates the operator’s ability to perform their job safely and efficiently.
By the end of the CPCS A59c Excavator 360° – Above 10 Tonnes (Lifting Operations) course, participants will have acquired the skills and knowledge necessary to handle a wide range of lifting tasks, contributing to improved safety and operational effectiveness on construction sites.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
The purpose of this course is to provide specialised training for individuals on the safe and efficient operation of 360° excavators above 10 tonnes for lifting operations. It covers both theoretical knowledge and practical skills essential for lifting tasks in construction and industrial environments.
This course is suitable for excavator operators, construction workers, site supervisors, and anyone involved in operating 360° excavators above 10 tonnes for lifting operations.
Upon successful completion, participants will receive a CPCS certification demonstrating their competency in operating 360° excavators above 10 tonnes for lifting operations.
There are no formal entry requirements. However, participants should have a basic understanding of construction safety practices and terminology.
The course covers topics such as safety regulations, machine components, load handling, operating techniques, site setup, emergency procedures, maintenance, and inspection specific to lifting operations using 360° excavators above 10 tonnes.
The course includes both theoretical instruction and practical training. Topics include the introduction to 360° excavators, safety regulations, machine components, load handling, operating techniques, site setup, emergency procedures, and maintenance.
Practical training involves hands-on operation of 360° excavators, including tasks such as maneuvering the excavator, rigging and lifting loads, and executing various lifting tasks safely and efficiently.
Participants are assessed through a combination of written examinations and practical assessments. They must demonstrate proficiency in operating 360° excavators for lifting operations and understanding key safety principles to receive certification.
The course emphasises various safety measures, including pre-operational inspections, emergency procedures, risk management strategies, and adherence to safety regulations and standards.
Participants learn techniques for conducting routine maintenance checks and inspections on 360° excavators used for lifting operations. The course highlights the importance of regular maintenance for ensuring machine reliability and safety.
All necessary equipment and machinery for practical training are provided as part of the course.
The duration of the course varies, but it typically spans several days, combining both theoretical instruction and practical training sessions.
Yes, the course includes training on environmental factors and their impact on 360° excavator lifting operations, including strategies for selecting suitable excavator setup locations and establishing proper ground conditions.
If a participant fails the assessment, they will receive feedback on their performance and may have the opportunity to retake the assessment or additional training sessions, depending on the provider’s policies.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
Whether you have a technical question about a course or an enquiry about training management, our team of specialist consultants is here to assist you.
Explore expert insights and updates in construction training, management, safety, and regulations with our comprehensive knowledge base.
We don't cancel courses, we deliver 98% of courses - even the low runners! If we've agreed, we've agreed.
Our team are some of the most experienced people within the industry - offering the right advice.
We offer free Training Matrix Management, providing you with a fully managed training function, at no cost to you.
Our mission is to provide the best customer experiences within the training sector - without compromise.
* Excluding for events outside our control
Need some advice? Can't quite find what you're looking for? Want to check if we can deliver on your site? Or would just rather speak to someone to book your course. We're always at the end of the phone.
Booking Enquires